The Keithley 2302 Battery Simulator is a single-output instrument that emulates battery characteristics for development and testing of battery-powered devices. It reproduces the voltage and current behavior of real batteries under dynamic operating conditions, including rapid transient response during current demand transitions—such as shifts from low-power standby to high-power RF transmission. The instrument simulates discharged battery states and sources current to external chargers, enabling comprehensive evaluation of device performance across the battery’s discharge cycle. Variable output resistance (0 to 1.00Ω) models real battery response. Built-in pulse current measurement captures peak, average, and baseline values. A long integration mode measures average current over 850ms to 60 seconds. Onboard DVM reads applied voltage from -5V to +30V DC. Automatic sense lead detection prevents faults from disconnected measurement leads.
Technical Specifications
Output Characteristics
• Voltage range: 0 to +15V DC
• Voltage accuracy: ±(0.05% + 10mV)
• Voltage resolution: 10mV
• Current output (0–4V): 5A maximum
• Current output (>4V): 60W / (VSET + 6V)
• Current readback accuracy (5A range): ±(0.2% + 200µA)
• Current readback resolution: 100µA
• Current sinking capability: Up to 3A
• DC current sensitivity: 100nA
• Power rating: 60W
• Line regulation: 0.5mA
• Load regulation: 0.01% + 1mA
• Stability: 0.01% + 50µA
Variable Output Resistance (Battery Simulation)
• Range: 0 to 1.00Ω
• Resolution: 10mΩ
• Patents: U.S. Patent No. 6,204,647
Integrated Measurements
• DVM input range: -5V to +30V DC
• DVM accuracy: ±(0.05% + 3mV)
• DVM resolution: 1mV
• Pulse current measurements: Peak, average, baseline
• Long integration mode: 850ms to 60 seconds
– Key Features
• Single output channel with 60W power budget
• Ultrafast transient response for RF load simulation
• Current sink function for charger testing
• Automatic open sense lead detection
• 4-channel relay control port (DB-9): 100mA per channel, 250mA total capacity at 24V maximum
– Interfaces & Environment
• GPIB (IEEE-488) control
• Input voltage: 100–120/220–240 VAC
• Operating temperature: -20°C to 70°C
• Operating humidity: <80% at 35°C non-condensing
• Dimensions: 89mm H × 213mm W × 411mm D
• Mounting: Benchtop
